A. Jakovics

V. Dzelme, A. Jakoviċs and E. Baake, Electromagnetic control of the direct strip casting process, Vol. 59, No. 3/4, 415-424, 2023 [Abstract] [PDF]
S. Pavlovs, A. Jakoviċs and A. Chudnovsky, Numerical study of heating and melting of metal in the industrial scale direct current electrical arc furnace, Vol. 59, No. 3/4, 391-400, 2023 [Abstract] [PDF]
A. Jegorovs, V. Dzelme and A. Jakoviċs, Experimental validation of liquid metal MHD numerical models, Vol. 58, No. 4, 409-416, 2022 [Abstract] [PDF]
S. Pavlovs, A. Jakoviċs and A. Chudnovsky, Electrovortex flow and melt homogenization in the industrial direct current electrical arc furnace, Vol. 58, No. 3, 305-326, 2022 [Abstract] [PDF]
S. Pavlovs, A. Jakoviċs, Yu. Ivochkin and A. Chudnovsky, Comparison of numerical and experimental results on melt electrovortex flow driven by direct current supplied over top and bottom electrodes, Vol. 58, No. 3, 293-304, 2022 [Abstract] [PDF]
V. Dzelme, A. Jakovics and E. Baake, Dynamics of liquid metal layer in transverse AC magnetic field, Vol. 58, No. 1/2, 141-150, 2022 [Abstract] [PDF]
S. Pavlovs, A. Jakoviċs, A. Chudnovsky, Yu. Ivochkin, I. Teplyakov and D. Vinogradov, Numerical and experimental study of electrovortex flow and temperature field in liquid metal with bifilar power supply, Vol. 58, No. 1/2, 65-80, 2022 [Abstract] [PDF]
A. Chudnovsky, Yu. Ivochkin, A. Jakoviċs, S. Pavlovs, I. Teplyakov and D. Vinogradov, Investigations of electrovortex flows with multi electrode power supply, Vol. 56, No. 4, 487-498, 2020 [Abstract] [PDF]
V. Dzelme, A. Jakoviċs and E. Baake, Liquid metal free surface deformation in electrically induced vortical flow, Vol. 56, No. 1, 67-74, 2020 [Abstract] [PDF]
V. Dzelme, A. Jakoviċs and I. Bucenieks, Numerical modelling of a real rotating permanent magnet based electromagnetic induction pump, Vol. 53, No. 4, 731-738, 2017 [Abstract] [PDF]
J. Venċels, A. Jakoviċs and V. Geża, Simulation of 3D MHD with free surface using Open-Source EOF-Library: levitating liquid metal in an alternating electromagnetic field, Vol. 53, No. 4, 643-652, 2017 [Abstract] [PDF]
S. Spitans, H. Franz, E. Baake and A. Jakoviċs, Large-scale levitation melting and casting of titanium alloys, Vol. 53, No. 4, 633-642, 2017 [Abstract] [PDF]
A. Jakoviċs and J. Virbulis, PREFACE, Vol. 53, No. 4, 601-602, 2017 [Abstract] [PDF]
A. Tatuļċenkovs, A. Jakoviċs, E. Baake and B. Nacke, Numerical simulation of bubble flow in electroconducting liquids by the lattice Boltzmann method, Vol. 53, No. 2, 281-288, 2017 [Abstract] [PDF]
S. Pavlovs, A. Jakoviċs, V. Sushkovs and E. Baake, Gas bubbles and electrically conducting liquid turbulent flow in uniform magnetic field, Vol. 53, No. 1, 179-192, 2017 [Abstract] [PDF]
V. Dzelme, M. Šċepanskis, V. Geża, A. Jakoviċs and M. Sarma, Modelling of liquid metal stirring induced by four counter-rotating permanent magnets, Vol. 52, No. 4, 461-470, 2016 [Abstract] [PDF]
S. Spitans, E. Baake, A. Jakoviċs and H. Franz, Numerical simulation of electromagnetic levitation in a cold crucible furnace, Vol. 51, No. 3, 567-578, 2015 [Abstract] [PDF]
M. Šċepanskis, M. Sarma, R. Nikoluškins, K. Thomsen, A. Jakoviċs, P. Vontobel, T. Beinerts, A. Bojareviċs and E. Platacis, A report on the first neutron radiography experiment for dynamic visualization of solid particles in an intense liquid metal flow, Vol. 51, No. 2, 257-266, 2015 [Abstract] [PDF]
S. Spitans, E. Baake, B. Nacke and A. Jakoviċs, New technology for large scale electromagnetic levitation melting of metals, Vol. 51, No. 1, 121-132, 2015 [Abstract] [PDF]
S. Pavlovs, A. Jakoviċs, V. Sushkovs and B. Nacke, LES-study of heat transfer in the melt for metallurgical MHD devices with power supply by inductor and over electrodes, Vol. 51, No. 1, 67-82, 2015 [Abstract] [PDF]
M. Šċepanskis, E. Yu. Koroteeva, V. Geża and A. Jakoviċs, Simulation of liquid metal flow induced by counter-rotating permanent magnets in a rectangular crucible, Vol. 51, No. 1, 37-44, 2015 [Abstract] [PDF]
V. Geża, B. Nacke, E. Baake and A. Jakoviċs, Anisotropy of flow and transition between mixing regimes in physical model of directional solidification, Vol. 51, No. 1, 15-24, 2015 [Abstract] [PDF]
S. Pavlovs, A. Jakoviċs, E. Baake and B. Nacke, Melt flow patterns in metallurgical MHD device with combined inductive and conductive power supply, Vol. 50, No. 3, 303-316, 2014 [Abstract] [PDF]
M. Šċepanskis, A. Jakoviċs, E. Baake and B. Nacke, Analysis of the oscillating behaviour of solid inclusions in induction crucible furnaces, Vol. 48, No. 4, 677-686, 2012 [Abstract] [PDF]
S. Pavlovs, A. Jakoviċs, E. Baake, B. Nacke and M. Kirpo, LES modelling of turbulent flow, heat exchange and particle transport in industrial induction channel furnaces, Vol. 47, No. 4, 399-412, 2011 [Abstract] [PDF]
S. Spitans, A. Jakoviċs, E. Baake and B. Nacke, Numerical modelling of free surface dynamics of melt in an alternate electromagnetic field, Vol. 47, No. 4, 385-397, 2011 [Abstract] [PDF]
E. Baake, A. Jakoviċs, S. Pavlovs and M. Kirpo, Long-term computations of turbulent flow and temperature field in the induction channel furnace with various channel design, Vol. 46, No. 4, 461-474, 2010 [Abstract] [PDF]
V. Geża, A. Jakoviċs, U. Krieger and B. Halbedel, Conditions of EM forced laminar mixing in a special glass melter, Vol. 46, No. 4, 449-460, 2010 [Abstract] [PDF]
S. Spitans, A. Jakoviċs, E. Baake and B. Nacke, Numerical modelling of free surface dynamics of conductive melt in induction crucible furnace, Vol. 46, No. 4, 425-436, 2010 [Abstract] [PDF]
M. Šċepanskis, A. Jakoviċs and B. Nacke, Homogenization of non-conductive particles in EM induced metal flow in a cylindrical vessel, Vol. 46, No. 4, 413-424, 2010 [Abstract] [PDF]
A. Jakoviċs, PREFACE, Vol. 46, No. 4, 331-332, 2010 [Abstract] [PDF]
V. Frishfelds, A. Jakoviċs, B. Nacke and E. Baake, Diffusion limited growth-up of channels of ICF and its influence on integral flow through the channel, Vol. 45, No. 4, 613-621, 2009 [Abstract] [PDF]
V. Geza, A. Jakoviċs, B. Halbedel and U. Krieger, Crossed EM fields' driven weak conducting melt flow in an annular cylinder, Vol. 45, No. 4, 595-603, 2009 [Abstract] [PDF]
D. Cepite, A. Jakoviċs and B. Halbedel, Modelling convective and radiative heat transfer in a glass melting model crucible, Vol. 45, No. 4, 587-594, 2009 [Abstract] [PDF]
M. Kirpo, A. Jakoviċs, E. Baake and B. Nacke, LES study of particle transport in turbulent recirculated liquid metal flows, Vol. 45, No. 3, 439-450, 2009 [Abstract] [PDF]
E. Baake, M. Langejuergen, M. Kirpo and A. Jakoviċs, Analysis of transient heat and mass transfer processes in the melt of induction channel furnaces using LES, Vol. 45, No. 3, 385-392, 2009 [Abstract] [PDF]
A. Umbraško, E. Baake, B. Nacke and A. Jakoviċs, Numerical modelling of recirculated liquid metal flows in induction furnaces with the cold crucible, Vol. 43, No. 2, 243-252, 2007 [Abstract] [PDF]
V. Frishfelds, A. Jakoviċs and B. Nacke, Simulation of the melting process of ZrO₂-SiO₂ in an inductor crucible , Vol. 43, No. 2, 213-220, 2007 [Abstract] [PDF]
D. Cepite, A. Jakoviċs, B. Halbedel and U. Krieger, Modelling of electromagnetic glass convection with temperature-dependent properties of the melt, Vol. 43, No. 2, 195-204, 2007 [Abstract] [PDF]
M. Kirpo, A. Jakoviċs, E. Baake and B. Nacke, Analysis of experimental and simulation data for the liquid metal flow in a cylindrical vessel, Vol. 43, No. 2, 161-172, 2007 [Abstract] [PDF]
A. Jakoviċs, Preface, Vol. 43, No. 2, 149-150, 2007 [Abstract] [PDF]
M. Kirpo, A. Jakoviċs, E. Baake and B. Nacke, Modeling velocity pulsations in a turbulent recirculated melt flow, Vol. 42, No. 2/3, 207-218, 2006 [Abstract] [PDF]
M. Kirpo, A. Jakoviċs and E. Baake, Characteristics of velocity pulsations in a turbulent recirculated melt flow, Vol. 41, No. 2, 199-210, 2005 [Abstract] [PDF]
J. Kaupużs, A. Jakoviċs and B. Nacke, Stability conditions of the build-up formation on the surface of the refractory, Vol. 39, No. 4, 419-426, 2003 [Abstract] [PDF]
E. Baake, B. Nacke, A. Umbrashko and A. Jakoviċs, Large eddy simulation modeling of heat and mass transfer in turbulent recirculated flows, Vol. 39, No. 3, 291-298, 2003 [Abstract] [PDF]
E. Baake, B. Nacke, A. Jakovics and A. Umbrashko, Heat and mass transfer in turbulent flows with several recirculated flow eddies, Vol. 37, No. 1/2, 13-22, 2001 [Abstract] [PDF]
R. Drewek, A. Jakovich, A. A. Muhlbauer and B. Nacke, Experimental and numerical investigations of the melt flow in channel-induction furnaces, Vol. 32, No. 4, 433-443, 1996; English translation: Magnetohydrodynamics, Vol. 32, No. 4, 399-408, 1996 [Abstract] [PDF] [PDF]
U. Bethers, A. Jakovics, N. Jekabsons, I. Madzulis and B. Nacke, Modeling of the deposit formation in channel-type induction furnaces, Vol. 31, No. 3, 307-315, 1995; English translation: Magnetohydrodynamics, Vol. 31, No. 3, 269-278, 1995 [Abstract] [PDF] [PDF]
U. Bethers, A. Jakovics, N. Jekabsons, I. Madzulis and B. Nacke, Theoretical investigations of the conditions of the build-up formation in induction channel furnaces, Vol. 30, No. 2, 247-258, 1994; English translation: Magnetohydrodynamics, Vol. 30, No. 2, 201-210, 1994 [Abstract] [PDF] [PDF]
A. Muizhnieks and A. Yakovich, Mathematical modeling of MHD flow and the characteristics of a centrifugal conduction pump, Vol. 29, No. 4, 52-59, 1993; English translation: Magnetohydrodynamics, Vol. 29, No. 4, 365-370, 1993 [PDF] [PDF]
A. R. Muizhnieks and A. T. Yakovich, An approximate boundary layer calculation of a rotating closed MHD flow, Vol. 27, No. 3, 87-91, 1991; English translation: Approximate calculation of the boundary layer in rotating closed magnetohydrodynamic flows, Magnetohydrodynamics, Vol. 27, No. 3, 312-315, 1991 [Abstract] [PDF] [PDF]
N. V. Nikiforova, S. I. Pavlov, L. L. Tir and A. T. Yakovich, Numerical determination of melt circulation in an induction furnace with segmented conducting crucible involving the utilization of a meridional section model, Vol. 26, No. 2, 92-98, 1990; English translation: Magnetohydrodynamics, Vol. 26, No. 2, 215-221, 1990 [PDF] [PDF]
A. R. Muizhnieks and A. T. Yakovich, Numerical study of closed axisymmetric MHD-rotation in an axial magnetic field with mechanical interaction of azimuthal and meridional motions, Vol. 24, No. 1, 55-60, 1988; English translation: Magnetohydrodynamics, Vol. 24, No. 1, 50-54, 1988 [PDF] [PDF]
A. R. Muizhnieks, V. I. Platonov, L. A. Platonova and A. T. Yakovich, One-dimensional modeling of unsteady processes in a conduction centrifugal pump, Vol. 23, No. 4, 107-112, 1987; English translation: Magnetohydrodynamics, Vol. 23, No. 4, 439-443, 1987 [PDF] [PDF]
A. R. Muizhnieks, V. I. Platonov, L. A. Platonova and A. T. Yakovich, Effects of external magnetic-field patterns on the characteristics of a centrifugal conduction pump, Vol. 23, No. 2, 109-111, 1987; English translation: Magnetohydrodynamics, Vol. 23, No. 2, 208-210, 1987 [PDF] [PDF]
A. R. Muizhnieks and A. T. Yakovich, Numerical study of MHD flow in a conduction centrifugal pump based on an axisymmetrical mathematical model II. Structure and integral characteristics of the flow, Vol. 22, No. 1, 121-126, 1986; English translation: Magnetohydrodynamics, Vol. 22, No. 1, 103-107, 1986 [PDF] [PDF]
A. R. Muizhnieks and A. T. Yakovich, Numerical study of MHD flow in a conduction centrifugal pump based on an axisymmetrical mathematical model. I. Model and computational procedure, Vol. 21, No. 4, 117-121, 1985; English translation: Magnetohydrodynamics, Vol. 21, No. 4, 426-429, 1985 [PDF] [PDF]
S. I. Pavlov and A. T. Yakovich, Effect of the meniscus on circulation of the melt in an electric induction furnace, Vol. 17, No. 3, 104-109, 1981; English translation: Magnetohydrodynamics, Vol. 17, No. 3, 297-302, 1981 [PDF] [PDF]
Yu. Ya. Mikel'son, S. I. Pavlov and A. T. Yakovich, Numerical simulation of MHD flow in a region of arbitrary axissymmetrical configuration, Vol. 16, No. 3, 73-80, 1980; English translation: Magnetohydrodynamics, Vol. 16, No. 3, 280-287, 1980 [PDF] [PDF]
Yu. Ya. Mikel'son, A. T. Yakovich and S. I. Pavlov, Numerical investigation of averaged MHD flow in a cylindrical region with the adoption of working hypotheses for turbulent stresses, Vol. 14, No. 1, 51-58, 1978; English translation: Magnetohydrodynamics, Vol. 14, No. 1, 42-48, 1978 [PDF] [PDF]
Yu. Ya. Mikel'son, A. T. Yakovich and L. L. Tir, A method of calculating the velocity distribution in a cylindrical electric induction furnace, Vol. 13, No. 1, 97-101, 1977; English translation: Magnetohydrodynamics, Vol. 13, No. 1, 79-82, 1977 [PDF] [PDF]

Copyright: Institute of Physics, University of Latvia
Electronic edition ISSN 1574-0579
Printed edition ISSN 0024-998X
DOI: http://doi.org/10.22364/mhd